|
NC-5, 1/2" fluid ports, infinitely
adjustable 0-14 GPM
NC-10, 1" fluid ports, infinitely adjustable 0-40 GPM
NC-20, 2" flange fluid ports
Wetted internal components - Nitrile rubber and polypropylene.
(Call for material options).
Non-wetted components - Polypropylene. Fasteners are
plated steel and 300 series stainless steel. |
The NC Model (Polypropylene) is the most economical
choice for all water-based liquids and slurries. The pump components
assure outstanding resistance to abrasion and feature zero
water absorption. Thus, they are ideal for many applications
in the following industries:
Construction and Mining - dewatering excavations, tunnels,
ore processing, mine tailings, cement grout and plaster, brine
transfer.
Food - liquids and slurries such as mustard, catsup, relish,
jams and jellies.
Ceramics - tile, brick, pottery, china and ceramic slips.
Agricultural Products - grain treatment chemicals, water transfer. |
|
BK-5, 1/2" fluid ports, infinitely
adjustable 0-14 GPM
BK-10, 1" fluid ports, infinitely adjustable 0-40 GPM
BK-20, 2" flange fluid ports
Wetted internal components - Polypropylene and Teflon.
Non-wetted external components - Polypropylene. Fasteners are
300 series stainless steel. |
The BK Model (Polypropylene/Teflon**) is often used in corrosive
environments where the polypropylene materials of construction
provide excellent resistance to inorganic acids and bases,
plating solutions, chemical salts, alcohols and most water-soluble
inorganic chemicals. The BK-5 wetted components are pure polypropylene
and will not absorb dyes or surface colorants and will not
contaminate ultra-pure materials. The BK-10 is structurally
reinforced with glass fibers and may not be suited for all
ultra-pure applications. Some applications are:
Chemicals - corrosive and/or abrasive inorganic chemicals,
acids, bases. |
|
RD-5, 1/2" fluid ports, infinitely
adjustable 0-14 GPM
RD-10, 1" fluid ports, infinitely adjustable 0-40 GPM
RD-20, 2" Flange Fluid ports
Wetted internal components - Nylon and Teflon.
Non-wetted components - Nylon. Fasteners are plated
steel and stainless steel. |
The RD Model (Nylon/Teflon) offers superior resistance to
lubricants, power steering fluids, oils, fats (both animal
and vegetable types), hydrocarbons, solvent-based paints, lacquers,
detergents, gasoline, most aldehydes, esters and aromatics.
Nylon is also resistant to ketones and most chlorinated aliphatics.
Nylon will absorb slight amounts of water and dichlorides with
no decrease in physical properties. Typical industries and
applications include:
Chemicals - organic chemicals, petroleum slurries, oil skimming,
tank cleaning. |
|
KN-5, 1/2" fluid ports, infinitely
adjustable 0-14 GPM
KN-10, 1" fluid ports, infinitely adjustable 0-40 GPM
KN-20, 2" flange fluid ports |
Wetted internal
components - Kynar* and Teflon.
Non-wetted external components - Polypropylene and Kynar. Fasteners
are 300 series stainless steel.
The KN Model (PVDF/Teflon) has excellent mechanical properties
and is able to handle a wide range of chemicals, such as strong
acids and bases, phenols. |
|
|
|
